Economic evaluation of bio-based supply chains with CO2 capture and utilisation

Carbon capture and storage (CCS) and carbon capture and utilisation (CCU) are acknowledged as important R&D priorities to achieve environmental goals set for next decades. This work studies biomass-based energy supply chains with CO2 capture and utilisation. The problem is formulated as a mixed-integer linear program. This study presents a flexible supply chain superstructure to answer issues on economic and environmental benefits achievable by integrating biomass-coal plants, CO2 capture and utilisation plants; i.e. location of intermediate steps, fraction of CO2 emissions captured per plant, CO2 utilisation plants' size, among others. Moreover, eventual incentives and environmental revenues will be discussed to make an economically feasible project. A large-size case study located in Spain will be presented to highlight the proposed approach. Two key scenarios are envisaged: (i) Biomass, capture or utilisation of CO2 are not contemplated; (ii) Biomass, capture and CO2 utilisation are all considered. Finally, concluding remarks are drawn.Peer ReviewedPostprint (author's final draft

Scenario-based dynamic negotiation for the coordination of multi-enterprise supply chains under uncertainty

A novel scenario-based dynamic negotiation approach is proposed for the coordination of decentralized supply chains under uncertainty. The relations between the involved organizations (client, provider and third parties) and their respective conflicting objectives are captured through a non-zero-sum and non symmetric roles SBDN negotiation. The client (leader) designs coordination agreements considering the uncertain reaction of the provider (follower) resulting from the uncertain nature of the third parties, which is modeled as a probability of acceptance function. Different negotiation scenarios are studied: (i) cooperative, and (ii) non-cooperative and (iii) standalone cases. The use of the resulting models is illustrated through a case study with different vendors around aPeer ReviewedPostprint (author's final draft

Cluster headache attack remission with sphenopalatine ganglion stimulation:experiences in chronic cluster headache patients through 24 months

BACKGROUND: Cluster headache (CH) is a debilitating headache disorder with severe consequences for patient quality of life. On-demand neuromodulation targeting the sphenopalatine ganglion (SPG) is effective in treating the acute pain and a subgroup of patients experience a decreased frequency of CH attacks. METHODS: We monitored self-reported attack frequency, headache disability, and medication intake in 33 patients with medically refractory, chronic CH (CCH) in an open label follow-up study of the original Pathway CH-1 study. Patients were followed for at least 24 months (average 750 ± 34 days, range 699-847) after insertion of an SPG microstimulator. Remission periods (attack-free periods exceeding one month, per the ICHD 3 (beta) definition) occurring during the 24-month study period were characterized. Attack frequency, acute effectiveness, medication usage, and questionnaire data were collected at regular clinic visits. The time point “after remission” was defined as the first visit after the end of the remission period. RESULTS: Thirty percent (10/33) of enrolled patients experienced at least one period of complete attack remission. All remission periods followed the start of SPG stimulation, with the first period beginning 134 ± 86 (range 21-272) days after initiation of stimulation. On average, each patient’s longest remission period lasted 149 ± 97 (range 62-322) days. The ability to treat acute attacks before and after remission was similar (37 % ± 25 % before, 49 % ± 32 % after; p = 0.2188). Post-remission headache disability (HIT-6) was significantly improved versus baseline (67.7 ± 6.0 before, 55.2 ± 11.4 after; p = 0.0118). Six of the 10 remission patients experienced clinical improvements in their preventive medication use. At 24 months post insertion headache disability improvements remained and patient satisfaction measures were positive in 100 % (10/10). CONCLUSIONS: In this population of 33 refractory CCH patients, in addition to providing the ability to treat acute attacks, neuromodulation of the SPG induced periods of remission from cluster attacks in a subset of these. Some patients experiencing remission were also able to reduce or stop their preventive medication and remissions were accompanied by an improvement in headache disability

Prognostic significance of FLT3-ITD length in AML patients treated with intensive regimens

FLT3-ITD mutations are detected in approximately 25% of newly diagnosed adult acute myeloid leukemia (AML) patients and confer an adverse prognosis. The FLT3-ITD allelic ratio has clear prognostic value. Nevertheless, there are numerous manuscripts with contradictory results regarding the prognostic relevance of the length and insertion site (IS) of the FLT3-ITD fragment. We aimed to assess the prognostic impact of these variables on the complete remission (CR) rates, overall survival (OS) and relapse-free survival (RFS) of AML patients with FLT3-ITDmutations. We studied the FLT3-ITD length of 362 adult AML patients included in the PETHEMA AML registry. We tried to validate the thresholds of ITD length previously published (i.e., 39 bp and 70 bp) in intensively treated AML patients (n = 161). We also analyzed the mutational profile of 118 FLT3-ITD AML patients with an NGS panel of 39 genes and correlated mutational status with the length and IS of ITD. The AUC of the ROC curve of the ITD length for OS prediction was 0.504, and no differences were found when applying any of the thresholds for OS, RFS or CR rate. Only four out of 106 patients had ITD IS in the TKD1 domain. Our results, alongside previous publications, confirm that FLT3-ITD length lacks prognostic value and clinical applicability. © 2021, The Author(s)

Towards a carbon-neutral energy sector: Opportunities and challenges of coordinated bioenergy supply Chains-A PSE approach

The electricity generation sector needs to reduce its environmental impact and dependence on fossil fuel, mainly from coal. Biomass is one of the most promising future options to produce electricity, given its potential contribution to climate change mitigation. Even though biomass is an old source of energy, it is not yet a well-established commodity. The use of biomass in large centralised systems requires the establishment of delivery channels to provide the desired feedstock with the necessary attributes, at the right time and place. In terms of time to deployment and cost of the solution, co-combustion/co-gasification of biomass and coal are presented as transition and short-medium term alternatives towards a carbon-neutral energy sector. Hence, there is a need to assess an effective introduction of co-combustion/co-gasification projects in the current electricity production share. The purpose of this work is to review recent steps in Process Systems Engineering towards bringing into reality individualised and ad-hoc solutions, by building a common but adjustable design platform to tailored approaches of biomass-based supply chains. Current solutions and the latest developments are presented and future needs under study are also identified.Peer Reviewe

Economic evaluation of bio-based supply chains with CO2 capture and utilisation

Carbon capture and storage (CCS) and carbon capture and utilisation (CCU) are acknowledged as important R&D priorities to achieve environmental goals set for next decades. This work studies biomass-based energy supply chains with CO2 capture and utilisation. The problem is formulated as a mixed-integer linear program. This study presents a flexible supply chain superstructure to answer issues on economic and environmental benefits achievable by integrating biomass-coal plants, CO2 capture and utilisation plants; i.e. location of intermediate steps, fraction of CO2 emissions captured per plant, CO2 utilisation plants' size, among others. Moreover, eventual incentives and environmental revenues will be discussed to make an economically feasible project. A large-size case study located in Spain will be presented to highlight the proposed approach. Two key scenarios are envisaged: (i) Biomass, capture or utilisation of CO2 are not contemplated; (ii) Biomass, capture and CO2 utilisation are all considered. Finally, concluding remarks are drawn.Peer Reviewe

Thermal reconstruction techniques for the inspection of laminated composites

SIGLEAvailable from British Library Document Supply Centre- DSC:D95274 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Computer modelling of the photostructural changes in As_2(S,Se)_3Sn_0_._1 alloys

Experimental data of mass spectrometric analysis of vitreous As_2(S,Se)_3 chalcogenide glasses shows the perceptible difference in the values of As_m(S,Se)_n on currents before and after laser illumination. Data of the computational calculation of the stableness of molecular units are in good correlation with obtained experimental mass spectrometric data. After laser illumination we detect new kinds of molecular units as As_m, S_n and Se_n. The observed changes of the, ion currents in the mass spectrum may be explained in view of some re-arrangement in the shot-range order of the component atoms under illumination. We propose for discussion the results of computational modeling of molecular units such as As_m(S,Se)_n observed experimentally in the As_2(S,Se)_3Sn_0_._1 alloys by their mass spectrometric analysis before and after laser illumination. In this report we suppose that a study of the composition of condensed molecules by the intermediacy of mass spectrometry and HyperChem Computational Chemistry Program may harvest complementary information useful in orders to building structural models of chalcogenide glasses. On result of this work we also conclude that tin atoms in the As_2(S,Se)_3Sn_0_._1 network re bonded in two mode: before illumination as 2(S,Se)=Sn=2(S,Se)-type and after illumination as (S,Se)-Sn-(S,Se)-type. (author)Translated from Russian (Proceedings of Advanced Materials'99; Institute of Materials Science Problems, National Academy of Sciences of Ukraine)Available from British Library Document Supply Centre-DSC:9023.190(10024)T / BLDSC - British Library Document Supply CentreSIGLEGBUnited Kingdo

Coastal mosses of the genus Bryum Report to Plantlife carried out in England during 2001

SIGLEAvailable from British Library Document Supply Centre-DSC:7580.620(no 206) / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Integration of enterprise levels based on an ontological framework

Enterprises are highly complex systems in which one or more organizations share a definite mission, goals and objectives to offer a product or service. In this study, an ontological framework is built as a mechanism for exchanging information and knowledge models for multiple applications and effective integration between hierarchical levels. The potential of the general semantic framework that is developed is demonstrated using a case study concerning the enterprise supply chain network design-planning problemPeer Reviewe